16-5/8" High Lift HD Blade

Part# 92-124
16-5/8" Oregon High Lift HD Blade used on 48" Kubota RCK48, RCK48GR, RCK48P, RCK48-LT23, RCK48P-222Z models. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

• Replaces Kubota OEM# K5184-97532, K5576-34350, K5576-97530
  
• Width: 2.50"
• Thick: .250"
  
• Center Hole: 7/8"
• Offset: 9/16"
• Air Lift: 1-1/8
  
• Requires (3) for 48"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-9/16" High Lift HD Blade

Part# 91-438

20-9/16" Oregon High Lift Heavy Duty Blade used on 60" Kubota models: RCK60-24B, RCK60-27B, RCK60-30B, RCK60-F30, RCK60-21Z, RCK60-27B, RCK60-29B, RCK60-32, RCK60P-1000Z, RCK60P-227Z, RCK60P-327Z, RCK60P-331Z, RCK60P-400Z, RCK60P-725Z, RCK60P-781Z, RCK60R-331Z, RCK60R-F36, RCK60RP-1200Z, RCK60RP-1500Z. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Kubota OEM# 70000-00602, 70000-25001, 76539-34330, K5647-34340, K5647-97530, K5651-34340, K5668-97530, K5945-34360
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1-1/8"
• Offset: 1/2"
• Air Lift: 1-1/8"
  
• Requires (3) per 60"

(May NOT fit all models- Check product description for exact OEM Part # match)

16-5/8" High Lift HD Blade

Part# 91-613
16-5/8" Oregon High Lift Heavy Duty Blade used on 48" Kubota models: RCK48P-400Z, RCK48P-723Z and RCK48P-751Z. Oregon 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

• Replaces Kubota OEM# K5583-34340
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1-1/8"
• Offset: 9/16"
• Air Lift: 1-1/8"
• Require (3) for 48"

(May NOT fit all models- Check product description for exact OEM Part # match)

16-9/16" High Lift HD Blade

Part# 92-047
16-9/16 Oregon High Lift Heavy Duty Blade used on 48" Kubota models: RCK48-15BX, RCK48LT17, RCK48LTB, RCK48-20ZG, RCK48GR, RCK48P-124Z, RCK48P18BX, RCK48S-222Z. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

• Replaces Kubota OEM# K5182-71840, K5575-34330, K5575-97530
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 11/16"
• Offset: 1/2"
• Air Lift: 1-1/8"
• Require (3) for 48"

(May NOT fit all models- Check product description for exact OEM Part # match)

18-5/8" High Lift HD Blade

Part# 91-436
18-5/8" Oregon High Lift Heavy Duty Blade used on 54" Kubota RC54-24B, RC54-71B, RC54-F19, RC54-FZ21, RC54-G20, RCK54-18Z, RCK54P-400Z, RCK54P-724Z, RCK54P-781Z models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

• Replaces Kubota OEM# K5764-34340, K5613-34340, 70000-25004, 76529-34330
  
• Width: 2.50"
• Thick: .250"
  
• Center Hole: 1-1/8"
• Offset: 1/2"
• Air Lift: 1-1/16"
  
• Requires (3) per 54"
  
• For XHT version use part# B1KU1022

(May NOT fit all models- Check product description for exact OEM Part # match)

24-1/2" Gator G6 HD Mulching Blade

Part# 396-814

24-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 72" Kubota RC72-27B, RC72-30B, RC72-38, RCK72P-28Z, RCK72P-326HZ, RCK72P-331Z, RCK72P-332Z, RCK72P-F36 and RCK72P-F39 models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

• Replaces Kubota OEM# K5677-34330, K5677-34340, K5677-97530
• Length: 24-1/2"
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 1-1/8"
• Offset: 5/8"
• Air Lift: 1"
  
• Requires (3) per 72" deck

(May NOT fit all models- Check product description for exact OEM Part # match)

16-9/16" Gator G6 HD Mulching Blade

Part# 392-047
16-9/16" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Kubota GCK48-90T, GCK54-100Z, RCK48-20ZG, RCK48GR, RCK48P-124Z, RCK48S-222Z and RCK48P18BX models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length optimizes the cutting efficiency.

• Replaces Kubota OEM# K5575-34330, K5575-97530, K5579-92330, K5579-92332
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 11/16"
• Offset: 1/2"
• Air Lift: 1"
  
• Requires (3) per 48"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-9/16" Gator G6 HD Mulching Blade

Part# 396-787

20-9/16" Oregon Gator G6 Heavy Duty Mulching Blade used on 60" Kubota RC60-21B, RC60-F19, RC60-FZ21, RC60-24B, RC60-71B, RCK60-21Z, RCK60P-21Z, RCK60P-28Z, RCK60P-227Z, RCK60P-327Z, RCK60P-331Z, RCK60P-400Z, RCK60P-725Z, RCK60P-781Z, RCK60P-1000Z, RCK60P-F36, RCK60P-F39 models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

• Replaces Kubota OEM# 76539-34330, 70000-00602, 70000-25001, K5647-34340, K5647-97530, K5668-97530, K5945-34360
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 1-1/8"
• Offset: 1/2"
• Air Lift: 1"
• Requires (3) per 60" deck

(May NOT fit all models- Check product description for exact OEM Part # match)

20-9/16" Gator G6 Mulching Blade

Part# 396-816
20-9/16" Oregon Gator G6 Heavy Duty Mulching Blade various 60" Kubota RCK60P-1200Z models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Kubota OEM# 77700-07936, K5955-34360, K5955-97530
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 1-5/16"
• Offset: 5/8"
• Air Lift: 1"
  
• Requires (3) per 60"

(May NOT fit all models- Check product description for exact OEM Part # match)