QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# 794-06921-9/16" Oregon High Lift OE Blade used on 42" Toro TimeCutter models: 71255, 74325, 74327, 74330, 74350, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425 and more. Also used on Exmark 42" Quest models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 96-80318-3/4" Oregon Gator G3 Mulching Blade used on 54" Toro Titan ZX5400 (74848, 74914), Titan XS5450 (74877, 74889, 74898), Titan ZX5420 (74924), TimeCutter HD XS5450 (74865, 74867, 74888) models. Also used on 54" Exmark Quest QTE708GEM54100 models. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 91-62218" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
Part# 91-62116-1/2" Oregon High Lift Blade used on several brands of 32" and 48" mower decks. Such as Bad Boy, Hustler, John Deere, Scag, Wright Stander and more. Oregon 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge.
Part# 794-01921-1/2" Oregon Blade used on early 62" Toro Groundsmaster and Z Master SFS models. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results
Part# 91-62318" Oregon Extended High Lift Blade used on 36"/52" Scag & Ferris models. Also used on various 36"/52" models, such as Bad Boy, Gravely, Husqvarna, Toro, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
Part# 96-32317" Oregon Gator G3 Mulching Blade used on 32"/50" Dixie Chopper. Also used on Gravely, Dixon and more. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.
Part# 94-06821-9/16" Oregon OE Mulcher Blade used on 42" Toro TimeCutter Series models: 71255, 74325, 74327, 74330, 74350, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425 and more. Also used on 42" Toro RZT420H & XLS420T Riding Mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 791-50620-1/2" Oregon High Lift Heavy Duty Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Hustler, Jacobsen and Toro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 96-31016-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 96-30816-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 94-06018-3/4" Oregon High Lift Blade used on Toro 54" Titan ZX5450, ZX5400, MX5400 and 54" TimeCutter HD ZX5400, TimeCutter My Ride HD models. Also used on various 54" Exmark Quest models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.Replaces Toro/Exmark OEM# 115-9650-03, 115-2454-03Blade Width: 2.25"Blade Thickness: .164"Offset: 5/16"Center hole: 5/8"Air Lift: 1-1/8"(3) per 54"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 94-05520-1/2" Oregon Medium Lift Heavy Duty Blade used on 60" models. Such as Bad Boy, BigDog, Bunton, Dixie Chopper, early Exmark, Gravely, Hustler, Big Dog, Jacobsen and Toro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 94-03915-1/2" Oregon High Lift Blade for various 44" Toro SFS decks on models 117, 120 Groundsmaster, TimeCutter ZX, XL440H Tractors, and Proline Pistol Grip Hydro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 594-60115-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 392-02520-1/2" Oregon Gator G6 Heavy Duty Mulching Blade for 60" decks used on various Exmark and new Toro models only, using the large center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 92-03524-1/2" Oregon High Lift Heavy Duty Blade used on various 72" models. Such as Bad Boy, Hustler, Scag and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.
Part# 94-05227" Oregon Medium Lift HD Blade used on Toro Groundsmaster 3500-D, 3505-D, 4500-D and 4700-D models. Oregon blades are individually straightened to provide a consistent, cleaner cut and increase blade longevity.
Part# 96-374
Each Price (6 or More): $19.35
Part# 96-74127" Oregon Gator G3 Mulching Blade used on Toro Groundsmaster 3500-D, 3505-D, 4500-D and 4700-D models. Gator mulching blade provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
Part# 96-36221-9/16" Oregon Gator G3 Mulching Blade used on 42" Toro Time Cutter models: 71255, 74324, 74325, 74327, 74330, 74350, 74360, 74363, 74365, 74366, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425, 74616, 74622, 74623, 74625, 74626, 74627, 74628, 74633, 74636, 74640, 74642. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 396-71616-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-73516-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on several brands of 48" mowers, from Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 96-34124-1/2" Oregon Gator G3 Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Hustler, Scag and more. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 396-72317" Oregon Gator G6 Heavy Duty Mulching Blade used on various 34" & 50" decks, such as Dixie Chopper, Dixon, Gravely, and Husqvarna. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-74020-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on various 60" models, such as Bad Boy, Dixie Chopper, Gravely, Hustler, Toro, and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.
Part# 94-62121-1/2" Oregon Gator G3 Mulching Blade used on 62" Toro 200, 3320 and 3280-D Series Groundsmaster (30551) models. Gator G3 blades offer superior mulching, fewer bag stops and cleaner side discharge than the standard manufacturers blade.
Part# 396-76424-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Hustler, Jacobsen, Scag and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
