Part# B1GH1900
18" XHT Low Lift Blade used on 52" Grasshopper Front Mount and M152 Mid Mount models. Also be used on Woods deck models. (Xtreme Hardness & Toughness) High Lift blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320236
• Replaces Woods OEM# 70104KT, 70117KT, 72505KT, 72896KT, 72897KT, 72904KT
• Blade Width: 2.00"
• Blade Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Requires (3) for 52"

Part# 91-558
18" Oregon Low Lift HD Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Can also be used on Woods mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320236
• Replaces Woods OEM# 70117KT, 72896KT
• Length: 18"
• Width: 2.50"
• Thickness: .250"
• Center Hole: 1/2"
• Offset: 5/16"
• Requires (3) for 52" cut

Part# 91-235
18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.

• Replaces Bad Boy OEM# 038-3000-00
• Replaces Encore OEM# 363291
• Replaces Ferris OEM# 1521227, 5021227
• Replaces Gravely/Great Dane OEM# GDU10231, D18037
• Replaces Husqvarna OEM# 539100341
• Replaces Jacobsen OEM# 390655
• Replaces Lesco OEM# 050125
• Replaces John Deere OEM# AM104490, PT11136
• Replaces Scag OEM# 48108, 481711, 482878
• Replaces Snapper OEM# 5101756, 5101756SYP
• Replaces Toro OEM# 133-2134
• Replaces Wright Mfg OEM# 71440001
• Length: 18"
• Width: 2.50"
• Thickness: .250"
• Center Hole: 5/8"
• Requires (2) For 36" (3) for 52"

Part# 792-208
18-1/2" Oregon Low Lift Blade used on 54" Hustler Diesel Z, FasTrak, FasTrak SD, Raptor Series, Super Z, Trimstar, and X-ONE models. Also used on 54" BigDog Alpha MP, Alpha MPX, BlackJack, Hike, R Powerbar, R Diablo, Series C, Stout, Stout MP and T Series models. Oregon replacement lawn mower blade is made to the exact OEM specification for optimum performance.

• Replaces Hustler OEM# 601124
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5/8"
• Air Lift: 13/16"
• Require (3) for 54" deck
• Or try our proprietary blade EMP# 26-985

Part# B1EM1840
20-1/2" XHT Low Lift HD Blade used on various 60" decks. Such as Bad Boy, Bunton, Dixie Chopper, early Exmark, Gravely, Hustler, Big Dog, Jacobsen and Toro models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending.

• Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
• Replaces Bunton OEM# PL7441
• Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  
• Replaces Exmark OEM# 103-1580, 103-2510
• Replaces Gravely OEM# 08781800, 08979600, 08979651
• Replaces Hustler/Excel OEM# 607564, 602248
  
• Replaces Jacobsen OEM# 30227-60L
• Replaces John Deere OEM# AM100538, M141785
• Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Require (3) for 60"

Part# 93-008
21" Oregon High Lift Heavy Duty Blade used on various 61" Bobcat, Snapper, Wright, and more

• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Outer Hole: 1/4"
• Air Lift: 1-3/16"
• Requires: (3) for 61"

Part# B1TR3106
21-1/2" XHT Low Lift Blade used on early 62" Toro Groundsmaster and Z Master SFS models. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the HXT blade are sharper and longer lasting cutting edges. More resistance to bending.

• Replaces Toro OEM# 44-6250, 44-6250-03
• Blade Width: 2.50"
• Blade Thickness: .187"
• Center hole: 1/2"
• (3) for 62" cut

Part# B1WA3402
25" XHT Left Hand Low Lift Blade used on Walker DC48, DC48R, DGHS48, DGHS48R Rear Discharge models. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

• Replaces Walker OEM 7705-2
• Length: 25"
• Width: 2-3/4"
• Thickness: .203"
• Center hole: 5/8"
• Outer hole: 3/16"
• Center to Center: 3"
• Right Hand Blade use EMP# B1WA3403
• (2) per 48" cut

Part# B1WA3403
25" XHT Low Lift Blade used on Walker DC48, DC48R, DGHS48, DGHS48R Rear Discharge models. Also used on Walker DSD48 Side Discharge models. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

• Replaces Walker OEM 7705-1
• Length: 25"
• Width: 2-3/4"
• Thickness: .203"
• Center hole: 5/8"
• Outer hole: 7/32"
• Center to Center: 3"
• Left Hand Blade use EMP# B1WA3402
• (2) per 48" cut

Part# 91-544
25" Oregon Low Lift Heavy Duty Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on various 72" Bush Hog and Country Clipper deck models. This blade is made to the exact OEM specification for optimum performance. Our blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Grasshopper OEM# 320250, 320255
• Replaces Bush Hog OEM# 88773
• Replaces Country Clipper OEM# H-2397, H-2459, H-2501
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 3/4"
• Requires (3) per 72"