QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# B1PD500516-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
Part# 96-31016-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# B1FE104816-1/4" XHT Notched Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.
Part# B1HV220216-1/4" XHT Medium Lift Blade used on 48" Husqvarna models: EZ4220, EZ4624, EZ4819, EZ4822, EZ4824, EZ5224, EZ5225, EZ5226, EZC4824, GTH26, GTH27, YTH24, YTH2648, MZ48, Z448. Also used on Yazoo Kees ZEKH48240, ZEKW48190, ZEKW48191X, GRAM211302 and Dixon RAM48ZT and Speed ZTR models.
Part# 29-90516-1/4" EMP T4 Heavy Duty Mulching Blade for several brands of 32" & 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
Part# 91-36816-1/4" Oregon Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. X-Tended Cutting Length™ optimizes the cutting efficiency and an enhanced mulching for bagging and discharge efficiency.
Part# B1PD500818" Predator Series HD Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, early Exmark, Ferris, Gravely, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
Part# 96-34418" Oregon Gator G3 Mulching Blade used on various 36" and 52" models. Such as Bad Boy, Ferris, Great Dane, John Deere, Scag, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 91-18418" Oregon High Lift HD Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
Part# B1BC120218" XHT High Lift HD Blade used on various 36" & 52" models. Such as: Bad Boy, Bobcat, Exmark, Ferris, Great Dane, Husqvarna, Snapper, Scag, John Deere, Toro, Wright Mfg and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.
Part# 91-62218" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
Part# B1HV220318" XHT Medium Lift Blade used on various 52" models; Husqvarna EZ5221, EZ5224, MZ25, MZ52, MZT52, MZ5225, MZ5226 and Yazoo Kees ZELKH5225, ZELKH52240, and ZEKW52210. Also used on Redmax CZT52, Dixon Ultra 52 and Jonsered Z52XFmodels.
Part# 91-23518" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.
Part# 29-94518" EMP T4 Heavy Duty Mulching Blade used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions
Part# 29-04518" EMP T4 Mulching Blade used on various 36" & 52"models. Such as: Bad Boy, Bobcat, early Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
Part# B1HV220419" XHT Medium Lift Heavy Duty Blade used on Husqvarna PZ54, Dixon DX254, Yazoo Kees ZPKW6029, and Redmax CZT54x models. Can be used on newer 54" Dixie Chopper Blackhawk & Blackhawk HP models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper & longer lasting cutting edge.
Part# 96-34721" Oregon Gator G3 Mulching Blade used on various 61" models. Such as Bad Boy, Gravely, Ferris, Scag, Wright Mfg and more. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.
Part# 26-07221" EMP High Lift Heavy Duty Blade used on various mowers with 61" mower decks. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are the best choice for thinner blade grasses such as Bluegrass, Rye, and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Bad Boy, Ferris, Scag, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 26-02121" EMP Medium Lift Heavy Duty Blade used on various 61" models. Such as Bad Boy, Bobcat, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue.
Part# 29-97421" EMP T4 Heavy Duty Mulching Blade used on 61" Decks for Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
Part# 28-62121" EMP Wavy Mulching Blade used on various 61" models. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.
