Part# 91-369
15-1/4" Oregon OE Style High Lift Blade for 44" Exmark Lazer Z CT, Lazer Z HP, Phazer. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly which delivers a clean cut for quality results.

• Replaces Exmark OEM# 103-2529-S, 103-2529S, 1-653101
• Length: 15-1/4"
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5/8"
• Requires (3) per 44" deck
• Best choice for broad leaf grasses such as Saint Augustine and Fescue

Part# 594-601
15-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

• Replaces Exmark OEM# 116-6358, 116-6358-03, 116-6358-S
  
• Replaces Toro OEM# 116-6358-03, 116-6358-S, 120-9500-03
• Blade Width: 3.00"
• Blade Thickness: .134"
• Center hole: 5/8"
• Outer hole: 5/16"
• Offset: 5/16"
• Air Lift: 1"
• Requires (2) per 30"

Part# B1PD5005
16-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

• Replaces Ariens/Gravely OEM# 00273000
• Replaces Bad Boy OEM# 038-4820-00
• Replaces Bobcat/Ransome OEM# WMTA32061
• Replaces Ferris OEM# 5020843
• Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
• Replaces Giant Vac OEM# 3021537, 3021584
• Replaces Husqvarna OEM# 539101366
• Replaces Jacobesen OEM# 390666
• Replaces Snapper OEM# 5103303S
• Replaces Toro OEM# 103-2507, 103-2517, 1-403149
• Length: 16-1/4"
• Width: 2.50"
• Thickness: .250"
• Center hole: 5/8"
• Requires (3) per 48" deck or (2) per 32" deck

Part# 96-310
16-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

• Replaces Ariens/Gravely OEM# 00273000
• Replaces Bad Boy OEM# 038-5000-00
• Replaces Bobcat/Ransome OEM# WMTA32061
• Replaces Ferris OEM# 5020843
• Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
• Replaces Giant Vac OEM# 3021537, 3021584
• Replaces Husqvarna OEM# 539101366
• Replaces Jacobsen OEM# 390666
• Replaces Snapper OEM# 5103303S
• Replaces Toro OEM# 103-2507, 103-2517, 1-403149
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5/8"
• Requires: (3) per 48"

Part# 96-321
16-1/4" Oregon Gator G3 Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

• Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
• Replaces Toro OEM# 109-6873
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Requires: (3) for 48"

Part# 396-716
16-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Ariens/Gravely OEM# 00273000
• Replaces Bad Boy OEM# 038-5000-00
• Replaces Bobcat/Ransome OEM# WMTA32061
• Replaces Ferris OEM# 5020843
• Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
• Replaces Giant Vac OEM# 3021537, 3021584
• Replaces Husqvarna OEM# 539101366
• Replaces Jacobesen OEM# 390666
• Replaces Snapper OEM# 5103303S
• Replaces Toro OEM# 103-2507, 103-2517, 1-403149
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 5/8"
• Air Lift: 1"
• Requires (3) per 48"
• if out of stock try our EMP# 29-905

Part# 396-321
16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
• Replaces Toro OEM# 109-6873
• Length: 16-1/4"
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 15/16"
• Requires (3) for 48"

Part# 392-205
16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 46" Exmark Triton deck models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. It’s not a replacement blade, It’s an upgrade.

• Replaces Exmark OEM# 103-8251, 103-8296, 109-6460, 116-5496-S
• Center hole: 15/16"
• Blade Width: 3.00"
• Blade Thickness: .250"
• Offset: 3/8"
  
• Requires (3) per 46" deck

Part# B1EM1895
16-1/4" XHT High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models.. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

• Replaces Exmark OEM# 103-6401, 103-6401-S
• Replaces Toro OEM# 109-6873
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Require (3) for 48"

Part# 792-029
16-1/4" Oregon High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

• Replaces Exmark OEM# 103-6401, 103-6401-S
• Replaces Toro OEM# 109-6872
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Air Lift: 1"
• Require (3) for 48"
• Supersedes to #792-029

Part# B1BC1201
16-1/4" XHT High Lift HD Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

• Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
• Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
• Replaces Exmark OEM# 1-323515, 1-403026, 103-6583-S
• Replaces Ferris OEM# 5020843
• Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
• Replaces Toro OEM# 103-2527
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Outer hole: 1/4
• Requires (3) per 48" deck & (2) for 32" deck on Bad boy, Bobcat/Ransome, Ferris, Ariens/Gravely, Husqvarna and Jacobsen
• Best choice for broad leaf grasses such as St Augustine and Fescue

Part# B1EM1805
16-1/4" XHT Medium Lift Blade used on 48" Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

• Replaces Ariens/Gravely OEM# 00273000, 04920600
• Replaces Bad Boy OEM# 038-4826-00
• Replaces Exmark OEM# 1-323515, 1-403026, 103-6583, 103-6583-S
• Replaces Ferris OEM# 5020843
• Replaces Husqvarna OEM# 539100340
• Replaces Simplicity/Snapper OEM# 5020843, 5020843SM
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5/8"
• Requires (2) for 32" deck or (3) for 48" deck

Part# 26-716
16-1/4" EMP Medium Lift Heavy Duty Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6401, 103-6401-S
• Replaces Toro OEM# 109-6872
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .250" Hi-alloy Carbon Bar Steel
• Center hole: 15/16"
• Require (3) for 48"
• Made in the USA in ISO 9001 certified plant

Part# 91-183
16-1/4" Oregon Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results

• Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
• Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
• Replaces Exmark OEM# 1-323515, 1-403059, 103-2527, 103-6583-S
• Replaces Ferris OEM# 5020843
• Replaces Gravely OEM# 00273000, 04919100, 04920600
• Replaces Husqvarna OEM# 539101366, 539106040, 539106041, 539109756
• Replaces Jacobsen OEM# 390666
• Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  
• Length: 16-1/4"
• Center hole: 5/8"
• Blade Width: 2.50"
• Blade Thickness: .250"
• Air Lift: 1"
• Requires (2) for 32" & (3) for 48"

Part# B1FE1048
16-1/4" XHT Notched Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

• Replaces Bad Boy OEM# 038-3000-00, 038-4820-00
• Replaces Bobcat OEM# WMTA3206, WMTA32061
• Replaces Ferris OEM# 5101986, 5101986BM, 5101986BMYP
• Replaces Gravely OEM# 04919100
• Replaces Husqvarna OEM# 539100340
• Replaces Jacobsen OEM# 390666
• Replaces Snapper OEM# 5101986BMYP
• Replaces Toro OEM# 103-2517, 103-2527
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Require (2) for 32" or (3) for 48" deck

Part# 29-905
16-1/4" EMP T4 Heavy Duty Mulching Blade for several brands of 32" & 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

• Replaces Ariens/Gravely OEM# 00273000
• Replaces Bad Boy OEM# 038-4827-00
  
• Replaces Bobcat/Ransome OEM# WMTA32061
• Replaces Ferris OEM# 5020843
• Replaces Exmark OEM# 103-2517, 103-2527, 103-6336, 103-6738, 109-6391
• Replaces Giant Vac OEM# 21537, 3021537, 3021584
• Replaces Husqvarna OEM# 539101366
• Replaces Jacobesen OEM# 390666
• Replaces Snapper OEM# 5103303S
• Replaces Toro OEM# 103-2507, 103-2517, 1-403149
• Length: 16-1/4"
• Center hole: 5/8"
• Blade Width: 2.50"
• Blade Thickness: .250" Hi-alloy Carbon Bar Steel
• Requires (2) for 32" deck or (3) per 48" deck
• For our Standard version use EMP# 29-005
• Made in the USA in ISO 9001 certified plant
• One of the most popular mulching design in commercial mowing

Part# 29-716
16-1/4" EMP T4 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
• Replaces Toro OEM# 109-6873
• Length: 16-1/4"
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Require (3) for 48"

Part# 28-167
16-1/4" EMP Wavy Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. With EMP brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade replaces the Exmark and Toro mulch kit blades and all the aftermarket brands. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6391, 103-6391-S
• Replaces Toro OEM# 109-6872
• Blade Width: 2.50"
• Blade Thickness: .204"
• Center hole: 15/16"
• Require (3) per 48"
• Made in the USA in ISO 9001 certified plant

Part# 91-368
16-1/4" Oregon Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. X-Tended Cutting Length™ optimizes the cutting efficiency and an enhanced mulching for bagging and discharge efficiency.

• Replaces Ariens/Gravely OEM# 00273000
• Replaces Bad Boy OEM# 038-5000-00
• Replaces Bobcat/Ransome OEM# WMTA32061
• Replaces Ferris OEM# 5020843
• Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
• Replaces Giant Vac OEM# 3021537, 3021584
• Replaces Husqvarna OEM# 539101366
• Replaces Jacobesen OEM# 390666
• Replaces Snapper OEM# 5103303S
• Replaces Toro OEM# 103-2507, 103-2517, 1-403149
• Blade Width: .250"
• Blade Thickness: .203"
• Center hole: 5/8"
• Air Lift: 1"
• Requires: (2) per 32" or (3) per 48"

Part# 92-026
16-1/4" Oregon Wavy Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. The Oregon mulching blade lawn mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results.

• Replaces Exmark OEM# 103-6391, 103-6391-S
• Replaces Toro OEM# 109-6873
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Requires (3) for 48"

Part# B1EM1815
16-1/4" XHT Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Ariens/Gravely OEM# 00273000
• Replaces Bad Boy OEM# 038-5000-00
• Replaces Bobcat/Ransome OEM# WMTA32061
• Replaces Ferris OEM# 5020843
• Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
• Replaces Giant Vac OEM# 3021537, 3021584
• Replaces Husqvarna OEM# 539101366
• Replaces Jacobesen OEM# 390666
• Replaces Snapper OEM# 5103303S
• Replaces Toro OEM# 103-2507, 103-2517, 1-403149
• Blade Width: .250"
• Blade Thickness: .187"
• Center hole: 5/8"
• Requires: (2) per 32" or (3) per 48"

Part# B1EM1810
17-29/32" XHT Wavy Mulching Blade for older 36" and 52" Exmark mower models. But it can also replace several other brands of mowers with the same deck sizes, such as: Ariens/Gravely, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.

• Replaces Exmark OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
• Length: 17-29/32"
• Width: 2.50"
• Thickness: .203"
• Center hole: 5/8"
• Requires (2) per 36" or (3) per 52"

Part# 492-731
17-1/2" Oregon High Lift Blade used on 50" Exmark Triton Deck models only. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.

• Replaces Exmark OEM# 103-9605, 103-9605-S, 109-6461-S
• Blade Width: 3.00"
• Blade Thickness: .203"
• Center hole: 15/16"
• Offset: 3/8"
• Air Lift: 1-1/16"
  
• Requires (3) for 50"

Part# B1PD5008
18" Predator Series HD Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, early Exmark, Ferris, Gravely, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

• Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
• Replaces Bobcat OEM# 32022, 32022A
• Replaces Encore OEM# 363291,
• Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
• Replaces Ferris OEM# 5103304, 5103304S
• Replaces Great Dane OEM# D18037
• Replaces Husqvarna OEM# 539100341, 539105712
• Replaces Jacobsen OEM# 390655
• Replaces Lesco OEM# 050125, 050140
• Replaces John Deere OEM# TCU29869, TCU35393
• Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
• Replaces Snapper OEM# 7-6450, 7-7344, 7075751
• Replaces Toro OEM# 105-7779-03
• Replaces Wright Mfg OEM# 71440009, 71440001
• Width: 2.50"
• Thickness: .250"
• Center Hole: 5/8"
• Requires (2) per 36" or (3) per 52"

Part# 96-344
18" Oregon Gator G3 Mulching Blade used on various 36" and 52" models. Such as Bad Boy, Ferris, Great Dane, John Deere, Scag, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
• Replaces Bobcat OEM# 32022, 32022A
• Replaces Encore OEM# 363291,
• Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
• Replaces Ferris OEM# 5103304, 5103304S
• Replaces Great Dane OEM# D18037
• Replaces Husqvarna OEM# 539100341, 539105712
• Replaces Jacobsen OEM# 390655
• Replaces Lesco OEM# 050125, 050140
• Replaces John Deere OEM# TCU29869, TCU35393
• Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
• Replaces Snapper OEM# 7-6450, 7-7344, 7075751
• Replaces Toro OEM# 105-7779-03
• Replaces Wright Mfg OEM# 71440009, 71440001
• Width: 2.50"
• Thickness: .203"
• Center Hole: 5/8"
• Air Lift: 3/4"
• Requires: (2) per 36" or (3) per 52"

Part# 96-322
18" Oregon Gator G3 Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on Newer Toro ZMaster models, using 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

• Replaces Exmark OEM# 103-6397, 116-5175
• Replaces Toro OEM# 109-6873
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Air Lift: 1"
• Requires (2) per 36" or (3) per 52"

Part# 396-726
18" Oregon Gator G6 Heavy Duty Mulching Blade used on several 36" and 52" models. Such as Bad Boy, older Exmark, Ferris, Jacobsen, John Deere, Snapper, Scag, Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.

• Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
• Replaces Bobcat OEM# 32022, 32022A
• Replaces Encore OEM# 363291,
• Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
• Replaces Ferris OEM# 5103304, 5103304S
• Replaces Great Dane OEM# D18037
• Replaces Husqvarna OEM# 539100341, 539105712
• Replaces Jacobsen OEM# 390655
• Replaces Lesco OEM# 050125, 050140
• Replaces John Deere OEM# TCU29869, TCU35393
• Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
• Replaces Snapper OEM# 7-6450, 7-7344, 7075751
• Replaces Toro OEM# 105-7779-03
• Replaces Wright Mfg OEM# 71440001
• Width: 3.00"
• Thickness: .250"
• Center hole: 5/8"
• Air Lift: 1"
• Requires (2) per 36" or (3) per 52"

Part# 396-322
18" Oregon Gator G6 Heavy Duty Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Exmark OEM# 103-6397, 116-5175
• Replaces Toro OEM# 109-6873
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 15/16"
• Air Lift: 1"
• Requires (2) per 36" or (3) per 52"

Part# B1EM1883
18" XHT High Lift Blade used on 36" & 52" Exmark and newer Toro models. Blade center holes require a splined blade bushing. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

• Replaces Exmark OEM#103-6402, 103-6402-S
• Replaces Toro OEM# 140-1242, 109-6873-03
• Length: 18"
• Width: 2.50"
• Thickness: .203"
• Center hole: 15/16"
• Requires: (2) for 36" or (3) for 52"