Part# B1TR3116
17-1/2" XHT High Lift Blade used on 50" Toro TimeCutter models: MX5060, SS5000, SS5035, SS5060, Z5000, Z5020, Z5035, Z5040 and Z5060. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

• Replaces Toro OEM# 110-6837-03, 112-9759-03, 115-5059-03
  
• Blade Width: 2.25"
• Blade Thickness: .169"
• Center hole: 5/8"

Part# 94-063
17-1/2" Oregon Angled Medium Lift Blade used on the following 50" Toro TimeCutter models: Z5000, Z5020, Z5030, Z5035, Z5040, and Z5060. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Toro OEM# 110-6837-03, 112-9759, 112-9759-03, 115-5059, 115-5059-03
• Width: 2.25"
• Thickness: .164"
• Center Hole: 5/8"
• Offset: 1/2"
• Air Lift: 15/16"
• Requires: (3) for 50"

Part# 93-008
21" Oregon High Lift Heavy Duty Blade used on various 61" Bobcat, Snapper, Wright, and more

• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Outer Hole: 1/4"
• Air Lift: 1-3/16"
• Requires: (3) for 61"

Part# B1GH1902
21" XHT Medium Lift Heavy Duty Blade used on 61" Grasshopper Front Mount and M161 Mid Mount models. Also used on 61" Woods D5221T & D6121T Mow'n Machine and County Clipper models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320242
• Replaces Country Clipper OEM# H-1667
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Requires (3) per 61"

Part# 94-068
21-9/16" Oregon OE Mulcher Blade used on 42" Toro TimeCutter Series models: 71255, 74325, 74327, 74330, 74350, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425 and more. Also used on 42" Toro RZT420H & XLS420T Riding Mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Toro OEM# 106-2247, 106-2247-03, 110-1857-03, 110-6568-03
• Replaces Exmark OEM# 110-6568-03, 117-5372-03
• Blade Width: 2.25"
• Blade Thickness: .164"
• Center hole: 5/8"
• Offset: 9/16"
• Air Lift: 13/16"
• Requires (2) per 42"

Part# 91-507
24-1/16" Oregon High Lift Heavy Duty Blade used on most 72" Dixie Chopper models: 3372, LP3000, SP2800, SP3000, SP3200, XCD74, XG2703, XT2800EFI, XT3000, XT3200, XT3300, XXG2703, XXG5400, XXW2600, XXW4000, XXW4600, XXWD3500, XXWD5000 and more. Also used on 72" Bad Boy Outlaw, Outlaw XP, Diesels, and Outlaw Extreme models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

• Replaces Bad Boy OEM# 038-7230-00
• Replaces Dixie Chopper OEM# 30227-72H, 30227-72N, 30227-72T
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Air Lift: 1-1/8"
• Require: (3) per 72"