QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# B1DC151024" XHT Medium Lift HD Blade used on 72" Dixie Chopper models: 3372, LP3000, SP2800, SP3000, SP3200, XCD74, XG2703, XT2800EFI, XT3000, XT3200, XT3300, XXG2703, XXG5400, XXW2600, XXW4000, XXW4600, XXWD3500, XXWD5000 and more. Can also be use on 72" Bad Boy Outlaw, Outlaw XP, Diesels, and Outlaw Extreme models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# 396-75224-1/16" Oregon Gator G6 Heavy Duty Mulching Blade used on 72" Dixie Chopper models: 3372, LP3000, SP2800, SP3000, SP3200, XCD74, XG2703, XT2800EFI, XT3000, XT3200, XT3300, XXG2703, XXG5400, XXW2600, XXW4000, XXW4600, XXWD3500, XXWD5000 and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
Part# 91-50724-1/16" Oregon High Lift Heavy Duty Blade used on most 72" Dixie Chopper models: 3372, LP3000, SP2800, SP3000, SP3200, XCD74, XG2703, XT2800EFI, XT3000, XT3200, XT3300, XXG2703, XXG5400, XXW2600, XXW4000, XXW4600, XXWD3500, XXWD5000 and more. Also used on 72" Bad Boy Outlaw, Outlaw XP, Diesels, and Outlaw Extreme models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 792-11624-1/2" Oregon High Lift Heavy Duty Blade used on 72" Kubota models: RCK72P-28Z, RCK72P-326HZ, RCK72P-331Z, RCK72P-332Z, RCK72P-F36. Enhanced mulching for bagging and discharge efficiency, and Enhanced hardening to keep the blade sharper and more durable. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.Replaces Kubota OEM# K5677-34330, K5677-34340, K5677-97530Width: 2.50"Thick: .250"Center Hole: 1-1/8"Offset: 5/8"Requires (3) per 72"(May NOT fit all models- Check product description for exact OEM Part # match
Part# 96-34124-1/2" Oregon Gator G3 Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Hustler, Scag and more. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 396-814
Part# 92-05724-1/2" Oregon High Lift Blade used on 72" Exmark Lazer Z models. Also used on new Toro Z Masters, that use 15/16" center hole, requiring a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increased blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency.
Part# 792-03324-1/2" Oregon High Lift Blade used on 72" Exmark and new style Toro models, that use the large center hole and require a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes cutting efficiency.
Part# 92-03524-1/2" Oregon High Lift Heavy Duty Blade used on various 72" models. Such as Bad Boy, Hustler, Scag and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.
Part# 26-24124-1/2" EMP Medium Lift Blade used on 72" models. Such as Bad Boy, Hustler, Scag, Toro and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue.
Part# 791-62724-1/2" Oregon Medium Lift Blade used on various 72"models. Such as Bad Boy, Hustler, Scag and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 26-02424-1/2" EMP Medium Lift HD Blade used on 72" models. Such as Bad Boy, Dixon, Gravely, Hustler, Scag, Toro and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue.
Part# 792-08424-1/2" Oregon Wavy Mulching Blade used on 72" Exmark and new style Toro models, that use the large center hole and require a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 396-77524-15/16" Oregon Gator G6 HD Mulching Blade used on various 72" John Deere X Series Tractors and Fairway Finishing models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# B1JD104724-15/16" XHT Medium Lift Heavy Duty Blade used on Deck Belt used on 72" John Deere Compact Utility Tractors models: 655, 755, 855, 955, 2032R, 2210, 4010, 4110, 4115, 4210, 4310, 4410, 4510, 4610, 4710. Also used on John Deere 72" Front Mount models: F910, F911, F912, F915, F925, F930, F932, F935 and 272 Rotary Mower Deck models.
Part# 96-72424-3/4" Oregon Gator G3 Mulching Blade used on early 72" Toro 224, 220, 220-D Series Groundsmaster models: 30223, 30224, 30794 and 30798. Increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 91-37424-3/8" Oregon High Lift Blade used on 72 Exmark Lazer Z (S/N 370,000-439,999), Lazer Z AC (S/N 440,000-599,999), Lazer Z LC (S/N 440,000-599,999), Lazer Z XP (S/N 320,000-599,999), Lazer Z XS Air Cooled (S/N 510,000-599,999) models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
Part# 92-13324-9/16" Oregon OE Style Heavy Duty Blade used on 72" Befco Cyclone Finishing Mower models 112-EZF, 115-EZF, 212, 215, 217, 312, 315, 317-FLX, 412, 415, 417-SFL and 716.
Part# 91-45625" Oregon High Lift Heavy Duty Blade used on 72" Land Pride models: AFM4016 & AFM40200, AFM4216, AT2560, AT2584, AT2572, AT2672, AT2660, AT2684, FD2548, FD2560, FDR1572, FDR1648, FDR1660, FDR2548, FDR2584, FDR2560 and FDR2572. The Oregon 91-456 mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results.
Part# 396-74325" Oregon G6 Gator Heavy Duty Mulching Blade used on 72" John Deere ZTrak Series, Compact Tractors and TerrainCut Front Mower models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 396-77825" Oregon Gator G6 Heavy Duty Mulching Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on 72" Bush Hog models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 396-72825" Oregon Gator G6 Heavy Duty Mulching Blade used on 72" Land Pride models: AFM4016 All Flex Grooming Mower, AFM40200 All Flex Grooming Mower, AT2572 Air Tunnel Grooming Mower, AT2584 Air Tunnel Grooming Mower, AT2660 Air Tunnel Grooming Mower, AT2672 Air Tunnel Grooming Mower, FD2548 Flat Deck Grooming Mower, FD2560 Flat Deck Grooming Mower, FD2572 Flat Deck Grooming Mower, FDR1572 Flat Deck Rear Discharge Mower, FDR1648 Flat Deck Rear Discharge Mower, FDR1660 Flat Deck Rear Discharge Mower, FDR2548 Flat Deck Rear Discharge Mower, FDR2572 Flat Deck Rear Discharge Mower. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
Part# 91-53325" Oregon High Lift Heavy Duty Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on 72" Bush Hog and Country Clipper deck models. This blade is made to the exact OEM specification for optimum performance.
Part# 92-114
Part# 94-01125" Oregon High Lift HD Blade used on 72" Toro Groundsmaster models with side discharge deck model# 30721. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results
Part# B1JD6018
Part# 91-54425" Oregon Low Lift Heavy Duty Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on various 72" Bush Hog and Country Clipper deck models. This blade is made to the exact OEM specification for optimum performance. Our blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 91-03625" Oregon Mulching HD Blade used on 72" Bush Hog ATH600, ATH720, FTH480, FTH600, and FTH720 models. Also used on various 72" Country Clipper SR1220, SR1220L SR1220, SR1220L and Grasshopper Front Mount, and M172 Mid Mount deck models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
Part# B1PD501825" Predator Heavy Duty Mulching Blade used on 72" John Deere ZTrak Series, Compact Tractors and TerrainCut Front Mower models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
