QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# 26-06116-1/2" EMP Medium Lift Heavy Duty Blade thats used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more.. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Lesco, Scag, Toro, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 96-30816-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 391-614 Each Price (6 or more): $22.9516-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Simplicity and Snapper models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 91-62016-1/2" Oregon High Lift Blade used on several brands 48" mower decks. Such as Hustler, Scag, Wright Mfg. and more. Oregon® 91-620 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.
Part# 26-00416-1/2" EMP High Lift Heavy Duty Blade used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, John Deere, Scag, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 92-03616-1/2" Oregon High Lift Heavy Duty Blade used on various 48" models. Such as Bad Boy, BigDog, Hustler, John Deere, Scag, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 29-91216-1/2" EMP T4 Heavy Duty Mulching Blade for several different brands for several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
Part# B1PD500516-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
Part# 96-31016-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 96-32116-1/4" Oregon Gator G3 Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 396-71616-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-32116-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# B1EM189516-1/4" XHT High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models.. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
Part# 792-02916-1/4" Oregon High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 793-00916-1/4" Oregon High Lift Blade used on 32"/48" Bobcat XM Series models. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.
Part# B1BC120116-1/4" XHT High Lift HD Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
Part# 26-71616-1/4" EMP Medium Lift Heavy Duty Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 91-18316-1/4" Oregon Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results
Part# B1HV220216-1/4" XHT Medium Lift Blade used on 48" Husqvarna models: EZ4220, EZ4624, EZ4819, EZ4822, EZ4824, EZ5224, EZ5225, EZ5226, EZC4824, GTH26, GTH27, YTH24, YTH2648, MZ48, Z448. Also used on Yazoo Kees ZEKH48240, ZEKW48190, ZEKW48191X, GRAM211302 and Dixon RAM48ZT and Speed ZTR models.
Part# 29-90516-1/4" EMP T4 Heavy Duty Mulching Blade for several brands of 32" & 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
Part# 29-71616-1/4" EMP T4 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 28-16716-1/4" EMP Wavy Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. With EMP brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade replaces the Exmark and Toro mulch kit blades and all the aftermarket brands. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 91-36816-1/4" Oregon Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. X-Tended Cutting Length™ optimizes the cutting efficiency and an enhanced mulching for bagging and discharge efficiency.
Part# 92-02616-1/4" Oregon Wavy Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. The Oregon mulching blade lawn mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results.
Part# B1EM181516-1/4" XHT Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# 91-12316-15/16" Oregon High Lift Blade for 48" Country Clipper and Snapper ZTR mowers. Used on Charger, JaZee, JaZee II/Pro, SR225, SR375, Trek Hydro Country Clippers models. Along with the follwing Snapper models: Z120T, Z1251BV, Z1401K, Z1404K, Z140T, Z160T, Z1800T, Z1801K, Z1804K, Z1805KV, Z180T, Z2001K, Z2004K, Z2010K, Z2010T, Z2205KV, Z4200M, Z4201M, Z4202M, Z4800M, Z4801M, Z4802M, Z4804M, Z6000M, Z6002M, Z6004M, ZTR, ZU4803M, ZU4804M, ZU4813M, ZU6003M, and ZU6004M. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 790-348 Each Price (6 or More): $10.7516-15/16" Oregon Blade used on 48" John Deere ZTrak and X Series Tractor models: X300, X304, X310, X320, X324, X330, X340, X350, X354, X360, X370, X380, X384, X390, X394, X500, X520, X530, X534, X540, X570, X580, X584, X590, X710, X730, X734, X738, X750, X754, X758, X940, X948, X949, Z325E, Z330M, Z330R, Z355E, Z355R, Z425, Z435, Z445, Z515E, Z7525E, Z530M, Z535M and Z540M.
Part# B1EP103516-3/4" XHT Notched High Lift Blade for 48" decks on several different models of Husqvarna, Craftsman, Dixon, Jonsered, Poulan, Poulanpro, and Yazoo Kees Tractor and Residential ZTR mowers. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
Part# B1KU1044 Each Price (6 or more): $14.9516-5/8" XHT High Lift Heavy Duty Blade used on 48" Kubota models: RCK48P-400Z, RCK48P-723Z and RCK48P-751Z. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
Part# B1KU1028 Each Price (6 or More): $13.2516-5/8" XHT High Lift Heavy Duty Blade used on 48" Kubota models: RCK48-20ZG, RCK48GR, RCK48P-90T, RCK48P-124Z, RCK48P18BX, RCK48S-222Z. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
