Part# 96-303
14-1/2" Oregon Gator G3 Mulching Blade used on older Dixon 42" models. Increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

• Replaces Dixon OEM# 13938, 8688, 539119853, 539126275
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 11/16"
• Air Lift: 1"
• Require (3) for 42" deck

Part# 96-319
20-1/2" Oregon Gator G3 Mulching Blade used on various 60" models. Such as Bad Boy, Big Dog, Dixie Chopper, Gravely, Hustler, Jacobsen, Toro, and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

• Replaces Bad Boy OEM# 038-6003-00
• Replaces Bunton OEM# PL7441
• Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  
• Replaces Exmark OEM# 103-2530, 103-2530-S
• Replaces Gravely OEM# 08781800, 08979600, 08979651
• Replaces Hustler/Big Dog OEM# 794230, 794214
  
• Replaces Jacobsen OEM# 30227-60X
• Replaces John Deere OEM# AM100538, M141785
• Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5/8"
• Air Lift: 3/4"
  
• Requires: (3) per 60"

Part# 99-103
20-11/16" Oregon High Lift Blade used on 21" Snapper Commercial Walk-behind (Steel deck) models. Also used on 41" Snapper LT11000 Tractor models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Snapper OEM# 7026691YP, 702669YP, 7028524, 7041939, 7019795
• Blade Width: 2.75"
• Blade Thickness: .164"
• Center hole: 3/8"
• Out hole: 3/8"
• Offset: 3/16"
• Air Lift: 1"
• Require (1) for 21" or (2) for 41"

Part# 96-620
20-11/16" Oregon Gator G3 Mulching Blade used on 21" Snapper Commercial Walk-behind (Steel deck)models. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

• Replaces Snapper OEM# 1-7002, 1-7168, 1-9645, 1-9702, 1-9710, 1-9795, 2-6691, 7017168, 7019795, 7019795BZ, 7019795BZYP, 7026407, 7026407AYP,
  7041939BZ, 7041939BZYP
• Blade Width: 2.75"
• Blade Thickness: .164"
• Center hole: 3/8"
• Out hole: 3/8"
• Offset: 3/16"
• Air Lift: 3/4"
• Require (1) for 21"

Part# 96-900
21" Oregon Gator G3 Mulching Blade used on 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, McCulloch and Weedeater.

• Replaces Husqvarna/AYP OEM# 586230101, 521981601, 532138498, 532422719, 532424752
• Blade Width: 2.50"
• Blade Thickness: .187"
• Center hole: 5 Point Star
• Air Lift: 3/4"
• Requires: (2) for 42"

Part# 396-702
21" Oregon Gator G6 Heavy Duty Mulching Blade used on various 61" Bobcat, Encore, Spartan and Wright Mfg models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

• Replaces Bobcat OEM# 112111-03
• Replaces Encore OEM# 832006
• Replaces Spartan OEM# 438-0002-00
• Replaces Wright Stander OEM# 71440007, 71440010
  
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 5/8"
• Offset: 1/2"
• Air Lift: 1"
• Requires: (3) per 61"

Part# 195-039
21" Oregon High Lift Blade used on most 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, McCulloch, Redmax, and Weedeater.

• Replaces Husqvarna/AYP OEM# 532127843, 532138971, 531005085
• Blade Width: 2.25"
• Blade Thickness: .187"
• Offset: 1/8"
  
• Center hole: 5 Point Star
• Requires: (2) for 42"

Part# 91-638
21" Oregon High Lift Blade used on various 61" models. Such as Bobcat, Bad Boy, Ferris, Gravely, Husqvarna, Scag, Snapper, Wright Stander and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency.

• Replaces Bad Boy OEM# 038-6085-00
• Replaces Bobcat OEM# 42180B, WM142180B
• Replaces Bunton OEM# PC005
• Replaces Encore OEM# 823006
• Replaces Ferris OEM# 5101755, 5101755S, 5101755YP
• Replaces Giant Vac OEM# 3021538
• Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
• Replaces Hustler OEM# 795252
• Replaces Husqvarna OEM# 539105711
• Replaces Lesco OEM# 050170
  
• Replaces Scag OEM# 481712
• Replaces Snapper OEM# 5101755BMYP
• Replaces Wright Stander OEM# 71440003
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5/8"
• Air Lift: 1"
• Requires (3) for 61"

Part# 91-628
21" Oregon High Lift Blade used on various 61" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Scag, Wright Mfg and more. This blade has an extended lift that measures 1-1/2". Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.

• Replaces Bad Boy OEM# 038-6080-00, 038-6085-00
• Replaces Bobcat OEM# 42180B, WM142180B
• Replaces Bunton OEM# PC005
• Replaces Encore OEM# 823006
• Replaces Ferris OEM# 15208425, 5020842
• Replaces Giant Vac OEM# 3021538
• Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
• Replaces Husqvarna OEM# 539105711
• Replaces Lesco OEM# 050170
  
• Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
• Replaces Snapper OEM# 5101755BMYP
• Replaces Wright Stander OEM# 71440003
• Blade Width: 3.00"
• Blade Thickness: .203"
• Center hole: 5/8"
• Air Lift: 1-1/2" (Extended High Lift)
• Require (3) for 61"

Part# 26-072
21" EMP High Lift Heavy Duty Blade used on various mowers with 61" mower decks. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are the best choice for thinner blade grasses such as Bluegrass, Rye, and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Bad Boy, Ferris, Scag, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Bad Boy OEM# 038-6080-00, 038-6085-00
• Replaces Bobcat OEM# 42180B, WM142180B
• Replaces Bunton OEM# PC005
• Replaces Encore OEM# 823006
• Replaces Ferris OEM# 15208425, 5020842
• Replaces Giant Vac OEM# 3021538
• Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
• Replaces Husqvarna OEM# 539105711
• Replaces Lesco OEM# 050170
  
• Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
• Replaces Snapper OEM# 5101755BMYP
• Replaces Wright Stander OEM# 71440003
• Length: 21"
• Blade Width: 2.50"
• Blade Thickness: .250" Hi-alloy Carbon Bar Steel
• Center hole: 5/8"
• Requires: (3) for 61" deck
• Requires: (2) for 42" on Wright Standers
• Made in the USA in ISO 9001 certified plant

Part# 93-011
21" Oregon High Lift Heavy Duty Blade used on various 61" Bobcat, Ransome, Wright Stander, Spartan and John Deere 661R Quik-Trak models. Oregon blades are individually straightened with an extended cutting edge and are hardened to provide a consistent, cleaner cut and increased blade longevity.

• Replaces Bobcat OEM# 112111-03, 112243-03
• Replaces John Deere OEM# TCU34281
  
• Replaces Spartan OEM# 438-0002-00
• Replaces Wright Stander OEM# 71440007, 71440010
  
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Offset: 1/2"
• Air Lift: 1-1/8"
• Requires: (3) per 61"

Part# 93-008
21" Oregon High Lift Heavy Duty Blade used on various 61" Bobcat, Snapper, Wright, and more

• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Outer Hole: 1/4"
• Air Lift: 1-3/16"
• Requires: (3) for 61"

Part# 28-621
21" EMP Wavy Mulching Blade used on various 61" models. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Bad Boy OEM# 038-6080-00
• Replaces Bobcat OEM# 42180B, WM142180B
• Replaces Bunton OEM# PC005
• Replaces Encore OEM# 823006
• Replaces Ferris OEM# 15208425, 5020842
• Replaces Giant Vac OEM# 3021538
• Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
• Replaces Hustler OEM# 795252
• Replaces Husqvarna OEM# 539105711
• Replaces John Deere OEM# UC10764,TCU35394
• Replaces Lesco OEM# 050170
  
• Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
• Replaces Snapper OEM# 5101755BMYP
• Replaces Wright Stander OEM# 71440003
• Blade Width: 2.50"
• Blade Thickness: .204" Hi-alloy Carbon Bar Steel
• Center hole: 5/8"
• Require (3) for 61" deck
• Made in the USA in ISO 9001 certified plant

Part# B1EP1023
21" XHT Mulching Blade used on most 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, McCulloch, Redmax, and Weedeater.

• Replaces AYP/Husqvarna OEM# 532139775, 594893101, 532138971, 531005085
• Blade Width: 2.25"
• Blade Thickness: .187"
• Center hole: 5 Point Star
• Requires: (2) for 42"

Part# B1CC1426
21-1/4" 2-N-1 High Lift Blade used on 42" Cub Cadet models: RZT-SX 42 EFI, RZT-SX 42 EFI, ZT1-42 KH, ZT1-42 KH (2021) and ZT1-42 KH (2020-2021). XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Cub Cadet OEM# 942-04308A
• Blade Width: 2.50"
• Blade Thickness: .164"
• Center hole: 6 Point Star
• Requires: (2) for 42"

Part# 598-629
21-3/16" Oregon Gator G5 Mulching Blade used on most (1997 & after) 42" MTD Lawn Tractor (Stamped deck) models: Cub Cadet, Craftsman, Bolens, Troybilt and Yardman.

• Replaces MTD OEM# 942-04308-X, 942-04312-X, 942-0616-X
• Blade Width: 3.00"
• Blade Thickness: .164"
• Center hole: 6 Point Star
• Air Lift: 1"
• Requires: (2) for 42"

Part# B1MA2414
21-3/16" XHT OE Mulching Blade used on most 42" MTD Lawn Tractor (Stamped deck) models: Bolens, Craftsman, Cub Cadet, Murray, Troybilt, Yardman and Yard Machine. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces MTD OEM# 742-0616, 742-0616A, 942-0616, 942-0616A
• Blade Width: 3.00"
• Blade Thickness: .156"
• Center hole: 6 Point Star
• Requires (2) for 42"

Part# B1PD5073
21-3/32" Predator Mulching Blade used on 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Jonsered and McCulloch.

• Replaces Husqvarna/AYP OEM# 586230101, 521981601, 532138498, 532422719, 532424752
• Blade Width: 2.50"
• Blade Thickness: .197"
• Center hole: 5 Point Star
• Requires: (2) for 42"

Part# 92-120
21-7/8" Oregon Medium Lift HD Blade used on 62" John Deere TerrainCut Front Mower Models 1550, 1570, 1575, 1580, 1585, and 1600. Also used on 62" & 42" John Deere 1600 and 1620 Turbo Series II Wide Area Mowers. This Oregon OEM replacement lawn mower blade is made to the exact OEM specification for optimum performance.

• Replaces John Deere OEM# M144297, M144935, TCU51118
• Blade Width: 2.50"
• Blade Thickness: .312"
• Center hole: 7/8"
• Offset: 3/8"
• Air Lift: 7/8"
  
• Requires (3) per 62" or (2) per 42"

Part# 96-362
21-9/16" Oregon Gator G3 Mulching Blade used on 42" Toro Time Cutter models: 71255, 74324, 74325, 74327, 74330, 74350, 74360, 74363, 74365, 74366, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425, 74616, 74622, 74623, 74625, 74626, 74627, 74628, 74633, 74636, 74640, 74642. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Toro OEM# 110-1857-03, 110-6568-03, 117-5372-03, 137-1999-03, 106-2247-03
  
• Center hole: 5/8"
• Blade Width: 2.25"
• Blade Thickness: .187"
  
• Offset: 5/8"
  
• Requires (2) per 42"

Part# 794-069
21-9/16" Oregon High Lift OE Blade used on 42" Toro TimeCutter models: 71255, 74325, 74327, 74330, 74350, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425 and more. Also used on Exmark 42" Quest models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Exmark/Toro OEM# 110-1857-03, 110-6568, 110-6568-03, 117-5372-03
  
• Blade Width: 2.25"
• Blade Thickness: .164"
• Center hole: 5/8"
• Offset: 5/8"
  
• Requires (2) per 42"
• Supersedes #94-069

Part# 94-068
21-9/16" Oregon OE Mulcher Blade used on 42" Toro TimeCutter Series models: 71255, 74325, 74327, 74330, 74350, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425 and more. Also used on 42" Toro RZT420H & XLS420T Riding Mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Toro OEM# 106-2247, 106-2247-03, 110-1857-03, 110-6568-03
• Replaces Exmark OEM# 110-6568-03, 117-5372-03
• Blade Width: 2.25"
• Blade Thickness: .164"
• Center hole: 5/8"
• Offset: 9/16"
• Air Lift: 13/16"
• Requires (2) per 42"

Part# 742P05528
Genuine OEM 21.23" 2-n-1 Blade used on Cub Cadet Ultima models: ZT1-42 KH (17AREACSA10) (2022-2023), ZT1-42 KH FAB (17AREACEA10) (2022-2023), ZT1-42 KW FAB (17RIEACE010) (2022-2023), ZTS1-42 KH FAB (17ARGBYEA10) (2022-2023). Also used on Troybilt Mustang Z42 (2022-2023) and Craftsman Z5200 CMXGNAM211701 (17ARFACS093) (2021-2023), CMXGNAM211701 (17RRFACS093) (2023).

• New Style Blade with "S" pattern center hole
• Used with spindle# 618P09260
  

Part# B1WA3400
22" XHT Left Hand OE Style Blade used on Walker DC42R, DGHS42 Rear Discharge models. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

• Replaces Walker OEM 5705-4
• Length: 22"
• Width: 2-3/4"
• Thickness: .203"
• Center hole: 5/8"
• Outer hole: 3/16"
• Center to Center: 3"
• Right Hand Blade use EMP# B1WA3401 (5705-3)