17" High Lift HD Blade

Part# 91-505
17" Oregon High Lift Heavy Duty Blade used on 34" and 50" Dixie Chopper, Gravely, Husqvarna and Toro. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

• Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50H
• Replaces Dixon OEM# 539129743
• Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
• Replaces Husqvarna OEM# 581055501
• Replaces Toro OEM# 11-3579, 11-3579-09
• Width: 2.50"
• Thickness: .250"
• Center Hole: 5/8"
• Air Lift: 1-1/8"
• Requires (2) for 32" and (3) for 50"

(May NOT fit all models- Check product description for exact OEM Part # match)

17" Gator G6 Mulching Blade

Part# 396-723
17" Oregon Gator G6 Heavy Duty Mulching Blade used on various 34" & 50" decks, such as Dixie Chopper, Dixon, Gravely, and Husqvarna. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50X
• Replaces Dixon OEM# 539129743
• Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
• Replaces Husqvarna OEM# 581055501
• Replaces Toro OEM# 11-3579, 11-3579-09
• Width: 3.00"
• Thickness: .250"
• Center Hole: 5/8"
• Requires (2) for 34" or (3) for 50"

(May NOT fit all models- Check product description for exact OEM Part # match)

17" High Lift Blade

Part# B1DC1502
17" XHT High Lift Blade used on 34" and 50" Dixie Chopper, Gravely, Husqvarna and Toro. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

• Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50H
• Replaces Dixon OEM# 539129743
• Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
• Replaces Husqvarna OEM# 581055501
• Replaces Toro OEM# 11-3579, 11-3579-09
• Length: 17"
• Width: 2.50"
• Thickness: .203"
• Center Hole: 5/8"
• Requires (2) for 34" and (3) for 50"

(May NOT fit all models- Check product description for exact OEM Part # match)

17" X-style Blade

Part# 91-525
17" Oregon X-style High Lift HD Blade used on 44" Dixie Chopper Iron Eagle & Silver Eagle and 50" Dixie Chopper Classic models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency.

• Replaces Dixie Chopper OEM# 30227-50X
• Width: 2.50"
• Thickness: .250"
• Center Hole: 5/8"
• Air Lift: 1-3/16"
• Requires: (3) per 44" & (3) per 50"

(May NOT fit all models- Check product description for exact OEM Part # match)

17-1/2" Gator G3 Mulching Blade

Part# 96-382

Each Price (6 or More): $16.35

17-1/2" Oregon Gator G3 Mulching Blade used on 50" Toro TimeCutter Z5000 (74370 SN 270000001-280999999)(74391 S/N 270000001-290000225), TimeCutter Z5020 (74372 SN 270000001-270999999)(74399 SN 270000001-290999999), TimeCutter Z5030 (74373 (SN 290000001-290999999), TimeCutter Z5035 (74398 SN 310000001-310999999)(74376 SN 310000001-310999999), TimeCutter Z5040 (74374 SN 270000001-280999999), TimeCutter Z5060 (74375 SN 280000001-310999999). Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly.

• Replaces Toro OEM# 110-6837-03, 112-9759, 112-9759-03
• Width: 2.25"
• Thickness: .187"
• Center Hole: 5/8"
• Offset: 7/16"
• Requires: (3) for 50"

(May NOT fit all models- Check product description for exact OEM Part # match)