QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# 95-61521-15/16" Oregon Gator G3 Mulching Blade used on 22" Husqvarna Self propelled models: HU550F, HU550FH, HU675FE, HU700F, HU700L, HU725AWD, and HU800AWD. Also used on AYP Products such as Craftsman and Poulan models.
Part# B1MA241721" XHT Notched Mulching Blade used on 21" Troybilt Walk-behind and Self propelled models: TB100, TB105, TB105B, TB110, TB115, TB120, TB120B, TB125, TB130, TB130XP, TB140, TB160, TB160XP, TB170XP, TB200, TB210B, TB220BXP, TB270ES, TB270XP, TB280ES, TB290ES, TB300XP, TB310BXP, TB320, TB340XP, TB365XP, TB370XP, TB380ES, TB400XP, TB430XP, TB450XP, and TB490XP and more. Also used on 21" MTD decks 1995 an older, such as Cub Cadet, Craftsman and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# B1EP102321" XHT Mulching Blade used on most 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, McCulloch, Redmax, and Weedeater.
Part# 96-31920-1/2" Oregon Gator G3 Mulching Blade used on various 60" models. Such as Bad Boy, Big Dog, Dixie Chopper, Gravely, Hustler, Jacobsen, Toro, and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.
Part# 96-32218" Oregon Gator G3 Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on Newer Toro ZMaster models, using 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 96-401
Each Price (6 or More): $11.95
Part# B1EM181516-1/4" XHT Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# 96-74920-1/2" Oregon Gator G3 Mulching Blade used on 60" Exmark and new Toro models. Blade center hole requires a splined blade bushing. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.
Part# 91-53421" Oregon High Lift Heavy Duty Mulching Blade used on 61" Grasshopper Front Mount and M161 Mid Mount models. Also used on Bush Hog ATH600, ATH720, FTH600, FTH720 models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 91-57420-1/2" Oregon Gator G3 Mulching Blade used on Swisher T-60, T1360, T1360H, T14560, T18560, ZT2350, ZT2560, ZT2660, ZT2660B models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly and delivers a clean cut for quality cut. Replaces Swisher OEM# 20186, 3293, 9004, 9037Width: 2.50"Thick: .187Center Hole: 3/8"Outer Hole: 3/8"Offset: 1/2"Air Lift: 3/4"Requires (3) per 60"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 96-32116-1/4" Oregon Gator G3 Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 595-08518" Oregon Gator G5 Mulching Blade used on Husqvarna EX5221, EZ5224, EZ5226, EZ5424, MZT52, MZ5225 and Dixon Ultra 52, Kodiak SE5223, Ram 52ZT, Ram Ultra 52 models. Also used on Yazoo Kees ZEKH5224, ZEKH52240, ZEKW52210, ZELKH5225 and Redmax CZT52 models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# B1PD507321-3/32" Predator Mulching Blade used on 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Jonsered and McCulloch.
Part# 598-62921-3/16" Oregon Gator G5 Mulching Blade used on most (1997 & after) 42" MTD Lawn Tractor (Stamped deck) models: Cub Cadet, Craftsman, Bolens, Troybilt and Yardman.Replaces MTD OEM# 942-04308-X, 942-04312-X, 942-0616-XBlade Width: 3.00"Blade Thickness: .164"Center hole: 6 Point StarAir Lift: 1"Requires: (2) for 42"
Part# 96-382
Each Price (6 or More): $16.35
Part# 93-60118" Oregon Gator G3 Mulching Blade used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Mfg Stander X and Sport X models. The Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.
Part# 594-60115-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 396-74818-5/8" Oregon Gator G6 Heavy Duty Mulching Blade used on 54" Kubota RCK54-23ZG, RCK54GR, RCK54P-127Z, RCK54P-127Z, RCK54P-127A, RCK54P23BX models.Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 96-34315" Oregon Gator G3 Mulching Blade for 44" Grasshopper Front Mount Deck models. Also used on Country Clipper 42" & 44" decks on Boss, Charger, JaZee, SR1025, SR375 and Trek Hydro mower models. Also used on Woods 44" decks on 1250, 1850, 1855, 2855, 5120, 5140, 5180, 5182, 5200, 5210, 5215, 5250, 6170, D14414T, D4414, D4414-3 mower models.
Part# 96-31817-7/8" Oregon Gator G3 Mulching Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities.
Part# 96-62020-11/16" Oregon Gator G3 Mulching Blade used on 21" Snapper Commercial Walk-behind (Steel deck)models. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.
Part# 396-32218" Oregon Gator G6 Heavy Duty Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 96-32918" Oregon Gator G3 Mulching Blade used on 52" Grasshopper Front Mount & M152 Mid Mount models. Also used on 52" Woods D5221T & D6121T Mow`n Machine models. Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.
Part# 96-374
Each Price (6 or More): $19.35
Part# 96-74127" Oregon Gator G3 Mulching Blade used on Toro Groundsmaster 3500-D, 3505-D, 4500-D and 4700-D models. Gator mulching blade provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
Part# B1PD201524-1/2" Predator Series HD Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Gravely, Hustler, Scag and more. Predator blades offer superior mulching capabilities over traditional mulching blades. The airflow tooth design increases blade strength while producing more airflow for smaller clippings. Predator blades have all the same benefits as XHT (Xtreme Hardness & Toughness) blades.
Part# 596-62720-15/16" Oregon Gator G5 Mulching Blade used on 60" Land Pride models: AFM4014 All Flex Grooming Mower, AT2560 Air Tunnel Grooming Mower, AT2660 Air Tunnel Grooming Mower, FD2560 Flat Deck Grooming Mower, FDR1560 Rear Discharge Grooming Mower, FDR1660 Rear Discharge Grooming Mower, FDR2560 Rear Discharge Grooming Mower. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. It’s not a replacement blade, It’s an upgrade.Replaces Land Pride OEM# 890-171C, 890-951CBlade Width: 3.00"Blade Thickness: .203"Center hole: 1"Offset: 3/4"Air Lift: 1"Requires (3) per 60"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 96-36221-9/16" Oregon Gator G3 Mulching Blade used on 42" Toro Time Cutter models: 71255, 74324, 74325, 74327, 74330, 74350, 74360, 74363, 74365, 74366, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425, 74616, 74622, 74623, 74625, 74626, 74627, 74628, 74633, 74636, 74640, 74642. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 396-74325" Oregon G6 Gator Heavy Duty Mulching Blade used on 72" John Deere ZTrak Series, Compact Tractors and TerrainCut Front Mower models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 396-612
