2 Cycle And Parts

Part# B116B0LSUH
16" Timber Ridge Guide Bar

• .325" Pitch, .050 Gauge, 66 Drive Links
• Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555
• Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
• Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540

Part# B118B0LSUHP
18" Timber Ridge Solid Tip Guide Bar

• .325 Pitch, .050 Gauge, 72 Drive Links
• Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555, 560XP
• Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
• Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
• Laminate Sprocket (4 Rivet Nose)
• Replaces Oregon# 180SLGK095
• Use 20LPX072G Oregon Chain

Part# B118A0RNUHP

18" Timber Ridge Replaceable Tip Guide Bar

• 3/8" Pitch, .050 Gauge, 68 Drive Links
• Replaceable Tip (1 Rivet Nose)
• Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555
• Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
• Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
• Can use Oregon Bar# 180VXLHK095
• Use Oregon Chain# 72LPX068G

Part# 99969-6157C
Kawasaki 2-Cycle Ktech Synthetic Blend Oil will extend the life of your 2-stroke engine with specially formulated, premium KTECH BLEND synthetic blend oil with fuel stabilizers. For use in all engines where API and JASO FD oil is recommended. KTECH BLEND 2-cycle engine oil is a synthetic blend that is certified by API TC, JASO FD and ISO EGD classifications for 2-cycle air-cooled small engine applications. Rust and corrosion inhibitors with a Low smoke formula. Reducing lacquer and varnish build up. Improving protection against bearing and ring wear & failure.

• 5 Gallon Bucket

Part# 99969-6086D
Kawasaki 2-Cycle Ktech Synthetic Blend Oil will extend the life of your 2-stroke engine with specially formulated, premium KTECH BLEND synthetic blend oil with fuel stabilizers. For use in all engines where API and JASO FD oil is recommended. KTECH BLEND 2-cycle engine oil is a synthetic blend that is certified by API TC, JASO FD and ISO EGD classifications for 2-cycle air-cooled small engine applications. Rust and corrosion inhibitors with a Low smoke formula. Reducing lacquer and varnish build up, improving protection against bearing and ring wear & failure.

• 1 gallon bottle
• 3 per Case

Part# 99969-6085C
Kawasaki 2-Cycle Ktech Synthetic Blend Oil will extend the life of your 2-stroke engine with specially formulated, premium KTECH BLEND synthetic blend oil with fuel stabilizers. For use in all engines where API and JASO FD oil is recommended. KTECH BLEND 2-cycle engine oil is a synthetic blend that is certified by API TC, JASO FD and ISO EGD classifications for 2-cycle air-cooled small engine applications. Rust and corrosion inhibitors with a low smoke formula. Reducing lacquer and varnish build up, improving protection against bearing and ring wear & failure.

• 12.8 oz. - 5 gallon mix bottle
• 24 to a case

Part# 99969-6084C
Kawasaki 2-Cycle Ktech Synthetic Blend Oil. will extend the life of your 2-stroke engine with specially formulated, premium KTECH BLEND synthetic blend oil with fuel stabilizers. For use in all engines where API and JASO FD oil is recommended. KTECH BLEND 2-cycle engine oil is a synthetic blend that is certified by API TC, JASO FD and ISO EGD classifications for 2-cycle air-cooled small engine applications. Rust and corrosion inhibitors with a low smoke formula. Reducing lacquer and varnish build up, improving protection against bearing and ring wear & failure.

• 6.4 oz. - 2.5 gallon mix bottle
• 48 per case

Part # 20LPX080G
20" Oregon PowerCut Chisel Chain

• .325" Pitch, .050 Gauge, 78 Drive Links
• The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
• Mainly used on saw engines 38cc to 62cc
• Most common on Husqvarna 455 Rancher saws from Lowe's with 20" Bars with a .325" pitch.

Our Part# 200RNBK095
20" Oregon PowerCut™ Chainsaw Bar

• .325" Pitch, .050 Gauge, 78 Drive Links
• Replaceable Tip (12 Tooth Nose Sprocket)
• Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555, 560XP
• Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
• Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
• Can use Timber Ridge Bar# B120B0LSUH
• Use 20LPX078G Oregon Chain

Part# B120B0LSUH
20" Timber Ridge Solid Nose Guide Bar

• .325 Pitch, .050 Gauge, 78 Drive Links
• Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555, 560XP
• Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
• Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
• Laminate Sprocket (4 Rivet Nose)
• Replaces Oregon# 200VXLGK095

Part# B120A0RNHVP
20" Timber Ridge Replaceable Tip Guide Bar

• 3/8" Pitch, .050 Gauge, 72 Drive Links
• Fits Husqvarna Models: 365, 372XP, 385XP, 394XP, 395XP, 562XP, 575XP, 576XP, 3120XP
• Fits Jonsered Models: 2065, 2071, 2077, 2083, 2094, 625, 630 Super II, 670 Super II
• Fits Shindaiwa Models: 550, 575, 577, 680, 695, 757
• Fits Makita/Dolmar Models: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000 and DCS9010FL
• Replaceable Nose (1 Rivet Nose)
• Replaces Oregon# 200RNDD009
• Use 72LPX072G Oregon Chain

Part# B120A0RNUHP

20" Timber Ridge Replaceable Tip Guide Bar

• 3/8" Pitch, .050 Gauge, 72 Drive Links
• Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555, 560XP
• Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
• Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
• Replaceable Nose (1 Rivet Nose)
• Replaces Oregon# 200RNDK095
• Use 72LPX072G Oregon Chain

Part #B120A3RNSNP

20" Timber Ridge Replaceable Tip Guide Bar

• Specs: 3/8" Pitch, .063" Gauge, 72 Drive Links
• Replaceable Nose (1 Rivet Nose)
• Fits Stihl models: 024, 026, 028, 032, 034, 036, MS260, MS261, MS270, MS280, MS290, MS291, MS310, MS341, MS360, MS361, MS390, MS391, MS440, MS441, MS460, MS650, MS660, MS661
• Same as Oregon Bar# 203RNDD025
  
• Use Oregon Chain# 75EXL072G

Part# B120B3LSSNP

20" Timber Ridge Solid Tip Guide Bar used on Stihl 024, 026, 028, 032, 034, 036, MS260, MS261, MS270, MS280, MS290, MS291, MS310, MS341, MS360, MS361, MS390 models.

• Replaces Stihl OEM# 3003 000 6821, 3003 002 7021
• Specs: .325" Pitch, .063" Gauge, 81 Drive Links
• Laminate Sprocket (4 Rivet Nose)
• Use Oregon PowerCut Chain# 22LPX081G

Part# B124A0RNHV

24" Timber Ridge Replaceable Tip Guide Bar

• 3/8" Pitch, .050 Gauge, 84 Drive Links
• Fits Husqvarna Models: 365, 372XP, 385XP, 394XP, 395XP, 562XP, 575XP, 576XP, 3120XP
• Fits Jonsered Models: 2065, 2071, 2077, 2083, 2094, 625, 630 Super II, 670 Super II
• Fits Shindaiwa Models: 550, 575, 577, 680, 695, 757
• Fits Makita/Dolmar Models: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000 and DCS9010FL
• Replaceable Nose (1 Rivet Nose)
• Replaces Oregon# 240RNDD009
• Use 72LPX084G Oregon Chain

Part# B128A0RNHVP

28" Timber Ridge Replaceable Tip Guide Bar

• 3/8" Pitch, .050 Gauge, 93 Drive Links
• Fits Husqvarna Models: 365, 372XP, 385XP, 394XP, 395XP, 562XP, 575XP, 576XP, 3120XP
• Fits Jonsered Models: 2065, 2071, 2077, 2083, 2094, 625, 630 Super II, 670 Super II
• Fits Shindaiwa Models: 550, 575, 577, 680, 695, 757
• Fits Makita/Dolmar Models: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000 and DCS9010FL
• Replaceable Nose (1 Rivet Nose)
• Replaces Oregon# 280RNDD009
• Use 72LPX093G Oregon Chain

Part# 80-101

Small 375 Speed Feed Trimmer Head Assembly. The landscapers most popular choice of trimmer heads on all the major brands such as Stihl, Husqvarna, Echo and Shindaiwa.

• Replaces Echo & Shindaiwa OEM# 7889030000, 7889018001, 99944200902, 99944200903
• Comes with (3) different arbors for mounting: 10 x 1.25 LH (Gold), 10 x 1.00 LH (Green), 8 x 1.25 LH (Red)
• Easy load in 30 seconds or less
• Semi-matic head for medium to heavy duty applications
• Replacing line without disassembling head
• Line tension system with split spool reduces vibration
• For replacement bump/cover use EMP part# 55-297

Part# 80-102

Large 4-1/2" Speed Feed Trimmer Head Assembly. The landscapers most popular choice of trimmer heads on all the major brands such as Stihl, Husqvarna, Echo and Shindaiwa.

• Replaces Echo & Shindaiwa OEM# 2882008000, 2882008001, 7889021001, X047000580
• Comes with (3) different arbors for mounting: 10 x 1.25 LH (Gold), 10 x 1.00 LH (Green), 8 x 1.25 LH (Red)
• Easy load in 30 seconds or less
• Semi-matic head for medium to heavy-duty applications
• Replacing line without disassembling head
• Line tension system with split spool reduces vibration
• For replacement bump/cover use EMP part# 55-349

Part# 55-349

Replacement Bump/Cover for the Large 450 Speed Feed Trimmer Head Assembly

• Replaces Echo & Shindaiwa OEM# X472000031, X472000070
• OD: 5"
• Used on EMP Part# 80-102

Part # 55-297

Replacement Bump/Cover for the Small 375 Speed Feed Trimmer Head Assembly

• Replaces Echo & Shindaiwa OEM# X472000011, X472000012, X470000181, 7889011340, 99944200907
• OD: 4"
• Used on EMP Part# 80-101

Part# A-754P06094

K Force Deck Belt used on 60" Cub Cadet Ultima ZT Series models

• Replaces Cub Cadet OEM# 754P06094
• Wrapped Aramid Cord (Brown)
• 5/8" W x 162.2" L

Part# 50-110
Each Price (2 or More): $3.00

Air Filter used on Echo Blower PB Series Backpack Blowers and Shindaiwa EB508RT & EB600RT Backpack Blower models.

• Replaces Echo OEM# A226000032
• Length: 4-1/8"
• Width: 2-3/4"
• Height: 1-1/2"

Part# 50-112
Each Price (2 or More): $2.45

Air Filter used on various Echo Edger & String Trimmers as well as Shindaiwa Hedge trimmers and blower models.

• Replaces Echo OEM# 13031054130, A226001410
• Length: 2-5/8"
• Width: 2-9/16"
• Hole Diameter: 1/4"

Part# 50-115
Each Price (2 or More): $3.15

Air Filter used on Echo String Trimmer, Edger, Blower and Power Pruner models.

• Replaces Echo OEM# 13031051830
  
• Length: 3-7/64"
• Width: 3-1/16"
• Hole Diameter: 1/4"

Part# 50-117
Each Price (2 or More): $3.45

Air Filter used on Echo PB Series Backpack Blowers and Shindaiwa EB633RT Backpack Blower models.

• Replaces Echo/Shindaiwa OEM# 13030508361
• Length: 10-1/2"
• Width: 3"

Part# 50-116
Each Price (2 or More): $2.75

Air Filter used on Echo Blowers (Backpack/Handheld), Pole Saws, Hedge Trimmers, String Trimmers and Shindaiwa Trimmer & Brushcutter models.

• Replaces Echo OEM# A226000350, A226000351, A226000470, A226000471, A226000472, A226000473
  
• Length: 3-1/8"
• Width: 3-1/8"
• Hole Diameter: 1/4"

Part# 50-120
Each Price (2 or More): $8.25

Air Filter used on Echo String Trimmers, Shaft Hedge Trimmers, Telescopic Polesaw & Handheld Blower and Shindaiwa String Trimmer, Brushcutter, Articulated Hedge Trimmer & Power Broom models.

• Replaces Echo/Shindaiwa OEM# A226002030
  
• Length: 3"
• Width: 3"
• Height: 3/4"

Part# 50-119
Each Price (2 or More): $6.75

Air Filter used on Echo PB770H & PB770T Backpack Blower models.

• Replaces Echo OEM# A226000410
• Length: 6 3/4"
• Width: 4 3/8"
• Height: 1"

Part # 55-336

Eyelet for 375 & 450 Speed Feed Trimmer Head Assemblies

• Replaces Echo & Shindaiwa OEM# 2882007340, X475000050
• Used on EMP Part# 80-101 & 80-102

Part# 55-002-1

Eyelet for Oregon's Super Bump Feed Trimmer Head Assembly

• Replaces Stihl OEM# 4110-713-8300
• Replaces Shindaiwa OEM# 7200592630
• Used on EMP part# 55-284